TCP/IP review: when do you need to reset it?
TCP/IP Reset restores the PC’s Internet Protocol parameters to default and often resolves connection troubles. Restoring these parameters is a routine work while attempting to fix “This Site Can’t be Reached” or “Unable to Connect to the Internet” or “Hmm… cannot reach this page” issues with error codes DNS_PROBE_FINISHED_NXDOMAIN یا INET_E_RESOURCE_NOT_FOUND.
Please refer to the navigation panel to promptly scroll to the data on resetting TCP IP solely on your Windows OS version.
Review of CMD commands for repairing network issues
You can refer to various commands for resetting particular network parameters. با این اوصاف, keep in mind the need to launch Command Prompt with Admin’s rights first. Failure to do so will result in TCP/IP resetting not functioning properly. علاوه بر این, you might experience an Access Denied issue.- Netsh int IP reset – appoints Internet Protocol Settings to default. The command rewrites two registry entries: SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\
SYSTEM\CurrentControlSet\Services\DHCP\Parameters\ - Netsh Winsock reset – Resetting Winsock Catalog to clean condition. Winsock, in brief, is responsible for Internet application input/output requests.
- netsh interface ipv4 reset – resetting all amendments to IPv4 parameters.
- netsh interface ipv6 reset – resetting all amendments to IPv6 parameters.
- Ipconfig /release command gives up the customer’s IP address obtained via the DHCP server. The /release command transfers the server a DHCP relate alert so that the previous IP address can be flagged as available and applied by other clients.
- Ipconfig /renew – this command is applied to ask for a new IP address and for refreshing DNS information via DHCP server.
- ipconfig /flushdns command is applied for clearing the DNS cache and forcing hostnames to be resolved freshly and applying the fresh DNS information. Read our complete tutorial on flushing DNS on Windows, مک, لینوکس, اوبونتو.
- netsh advfirewall reset – resetting Windows Firewall rules back to default values.
The following tutorial applies netsh int ip reset فرمان. هنوز, don’t hesitate to apply the extra commands reviewed above in case of necessity.
Resetting TCP/IP on Windows
پنجره ها 10
- Considering the version of your taskbar, either go to magnifying glass icon in the taskbar to open Windows search or, in case the search bar is obvious, مشخص كردن CMD.
- Search will deliver you خط فرمان result. Right-click it و انتخاب کنید به عنوان Administrator اجرا شود.
- Now, the کنترل حساب کاربری window should come up. انتخاب کنید آره. متناوبا، از سوی دیگر, provide the Admin’s password.
- In the command prompt, مشخص كردن netsh int ip reset و ضربه بزنید وارد. Take time until the TCP/IP reset is complete.
- Reboot your PC.
پنجره ها 8/8.1
For resetting TCP/IP on Windows 8/8.1, follow the below-said milestones.- Apply the کلید ویندوز + آر hotkey command to start اجرا کن سریع. Indicate cmd in it and hit Ctrl+Shift+Enter to launch it as Administrator.
- Once in the User Account Control Window, انتخاب کنید آره. در غیر این صورت, provide the Administrator’s password to proceed.
- که در CMD, مشخص كردن netsh int IP reset و ضربه بزنید وارد.
- Take time until a full reset is completed and then reboot your system.
Windows 7/Vista
- Click the آیکون ویندوز in the bottom left area and then enter CMD in the search field.
- پنجره ها 7 search will display either CMD یا خط فرمان in the Programs حوزه. Right-click this result and select به عنوان Administrator اجرا شود.
- کلیک خوب or provide Admin’s password to proceed.
- در Command Prompt, مشخص كردن netsh int ip reset و ضربه بزنید وارد.
- Take time until TCP IP resetting is complete and then reboot your device.
After fulfilling these guidelines, your TCP/IP stack will be duly reset.
پیام بگذارید