“Stop code: CRITICAL_PROCESS_DIED” scam that shows an alert that claims to be a Window notification. This message indicates that your important files will be removed and indicates that your system has error.

Skip reading the details and find out how to remove “Stop code: CRITICAL_PROCESS_DIED” fake Tech Support Scam!

When the “Stop code: CRITICAL_PROCESS_DIED” Scam is shown in your browser it will contain the specific text similar to the following.

Microsoft Edge

Stop code: CRITICAL_PROCESS_DIED | Error Report

Security system has detected the threatening attempt to gain access to your bank logins and related data, but this dangerous connection was blocked with Firewall and further data leak was prevented.
We strongly recommend you to perform temporary block of all your accounts, and take some necessary security measures.
Despite the timely blocking of the connection, there is still a serious threat of private data stealth.
Please don t wait to respond, every minute is important!
There is possibility that virus already hurt your disks or destroyed and stole its data.
It is reason for checking current system security and verifying its stability.
Do not spend your time and immediately call us or contact our service center support team.

We are waiting for your rapid responce to help you
Please contact our administration to solve this issue.

Regretfully, browser-based technology support notifies make it hard to close down the screen or in most cases also the internet browser itself. Fortunately, practically all browser-based tech assistance frauds can be shut down by mosting likely to the Windows Task Manager and also shutting down the browser process. It is required to understand, though, that if you terminate the web browser process that you do not restore formerly shut web sites if prompted by the internet browser when you launch it once again.

Furthremore, as long as standard website advertisements might reveal web browser tech support frauds, they are additionally typically utilized by numerous adware-type applications. Therefore, if you are completely encountering internet browser based tech assistance scams, you need to carry out scan research study of your PC for adware.

“Stop code: CRITICAL_PROCESS_DIED” – Why am I Encountering?

The Stop code: CRITICAL_PROCESS_DIED Fraud is displayed with ads that onward you to sites that reveal this rip-off. Such advertisements can be shown by set up adware applications or by means of less than trusted pages that are revealing them to produce marketing profits.

In the majority of the situations, if you experience a browser-based fake tech assistance fraud, after that you can simply shut down the internet browser and also launch it once more. On the other hand, if you are permanently coming across frauds similar to the “Stop code: CRITICAL_PROCESS_DIED” sharp, then you need to check your tool for adware as well as eliminate anything that is located within your system.

Self Help Instructions

This tutorial contains detailed facts, but has been elaborated in such a manner so that anyone can refer to it. Please make sure your information is backed up before you proceed.

To get rid of “Stop code: CRITICAL_PROCESS_DIED” Tech Support Scam, please undertake these steps:

This removal tutorial might look also complicated due to the number of the landmarks and also many applications that will certainly be used. It was just clarified by doing this to provide easy-to-understand, complete, as well as easy to comprehend standards that any person can relate to get clear this threat at no cost. Before utilizing this tutorial, we provide you read it as soon as and download all other essential applications to your desktop computer. Once you so, please print this write-up as you might require to shut down your browser home window or reboot your device.

To shut a browser-based Tech Support Scam alert, initial check if you can shut the tab it is being revealed on or the browser itself. If you are incapable of doing so, then you require to adhere to the steps listed below relying on your operating system.

Windows 8 & Windows 10Windows 7 & Windows Vista

To shut down Stop code: CRITICAL_PROCESS_DIED Tech Support Scam, you should stop the process for the browser that is now showing the browser-based tech support scam. To do this we will refer to the help of the Windows Task Manager. To start the task manager, hit the CtrlAlt, and Delete buttons simultaneously to reveal the Windows security screen displayed below.

Windows 10 - Task Manager

As soon as the above message is open, click on the Task Manager link as shown by the red arrow in the picture shown above.

The Windows Task Manager will now open and show all the active programs on the device as displayed below.

Tech Support Scam - the active programs end task

Browse via the list of running programs and left-click once on the task related to your web browser. The names for an active browser could specify Microsoft Edge,Internet ExplorerChrome, Opera and Firefox.

As soon as you have chosen a browser task, click on the End Task button to shut down the program and the browser tech support scam.

You require to close all internet browser tasks as soon as the window displaying the technology support fraud is closed down.

The following time you begin your web browser, do not permit the internet browser to display the last opened up site. You can currently go to the next steps.

To shut down Your Windows 7, Windows Vista is damaged and irrelevant Tech Support Scam, you should stop the process for the browser that is now showing the browser-based tech support scam. To do this we will apply the Windows Task Manager. To launch the task manager, hit the CtrlAlt, and Delete buttons simultaneously to obtain the Windows security message displayed below.

Windows 7 - Task Manager

At the above screen, click on the Task Manager option to launch the Windows Task Manager.

When Task Manager is launched you will be in the Applications area as displayed below.

Windows Task Manager - Applications

Right now, you need to select the Processes tab.

You will now end up at a screen that displays the active processes on your device. Click on the button revealed Show processes from all users as displayed in the picture below.

Windows Task Manager - End Process

Afterwards, check the list until you encounter your web browser’s process and left-click on it as soon as it gets highlighted. As soon as you choose the browser’s process, click on the End Process button as displayed by the red arrow in the image above. If you are uncertain of the process name to terminate, please have a look at the table below:

When you are using this browser: Terminate this process:
Internet Explorer iexplore.exe
Chrome chrome.exe
Safari Safari.exe
SeaMonkey seamonkey.exe
Opera opera.exe
Firefox firefox.exe

As soon as you click on the End Process button, Task Manager will ask you to prove if you are sure you would like to shut it down as displayed in the image below.

Windows Task Manager - End Process yes

Right now, you need to click on the Yes button for the purpose of killing the process.

Your browser window must now be shut down. The next time you start your browser, do not permit the browser to open the last opened website. You may now go to the next steps.


In order to stop any applications that may complicate the removal procedure we should first download the Rkill application. Rkill will inspect your device for available virus threats and try to stop them so that they would not prevent the removal procedure. For this purpose, you need to download RKill to your device via the following link.

Once you visit the download page, click on the Download Now button named iExplore.exe. If you are prompted what location to save it, make sure to save it on your desktop.


As soon as it is downloaded, double-click on the iExplore.exe icon. This way, you will automatically try to terminate any processes related to Stop code: CRITICAL_PROCESS_DIED Tech Support Scam and other threats. Please take your time while the application searches for various malware apps and terminates them. As soon as this has been done, the black window will automatically shut down and a log file will come up. You need to review the log file and then shut down so you can proceed with the next step.

If you have issues using RKill, you can download the other renamed versions of RKill via the rkill download page. All of the files stand for renamed copies of RKill, which you can use instead. Please bear in mind that the download page will come up in a new browser window or tab.

Do not restart your device after running RKill as the malware applications will be launched again.


Right now, you should download Loaris Trojan Remover, for the purpose of scanning your device for any any viruses, adware, or potentially unwanted applications that may be in place. Go ahead and download Loaris Trojan Remover via the following location and save it to your desktop:

As soon as it is downloaded, shut down all applications and open windows on your device.
At this point, double-click on the icon on your desktop named loaris-mypc.exe. This will begin the installation process of Loaris Trojan Remover into your system.
As soon as the installation starts, proceed with the installation guidelines in order to keep up with the installation procedure. Do not make any amendments to the default parameters and when the application has completed installing, Loaris will automatically launch itself and shown the main screen.

You will at this point be at the main screen for Loaris Trojan Remover as displayed below.

Loaris Trojan Remover - Scan Tab
Choose the Full Scan button to start the malware elimination scan.


Loaris will now begin scanning your device for viruses, adware, and potentially unwanted applications. This procedure can take quite a continuous time, so we offer you do something else and from time to time check on the stage of the scan to check when it is over.

Loaris Trojan Remover - scanning in process


As soon as Loaris has completed scanning it will show a screen that notifies of any applications that have been removed. Please keep in mind that the applications detected may be different than what is displayed in the image below.

Loaris Trojan Remover - show viruses
Inspect the scan results and when you are ready to proceed with the cleanup procedure, click on the Apply button to remove or repair all of the the chosen results.

As soon as the procedure is completed, you will encounter a screen that reports Completed. At this moment, you may shut down the Loaris Trojan Remover screen and proceed with the remainder of the guidelines.
If you are still experiencing issues with Stop code: CRITICAL_PROCESS_DIED Tech Support Scam then you need also to reset your browsers back to their default settings. Please keep in mind that this solution will delete all available add-ons, extensions, toolbars and other available customizations but will leave your bookmarks and favorites unchangeable.

We recommend that you reset your browser settings with the help of Trojan Killer Portable. For this puprose, perform the following steps.


Download Trojan Killer Portable by clicking on the button below:


Install and start the program. Click on the icon in the form of the globe to open the built-in utility to reset your available browsers:

Icon to open the utility to reset browser settings with Trojan Killer

Icon to open the utility to reset browser settings with Trojan Killer


Select the browsers you would like to reset and the available reset options. Finally, click on the “Reset” button:

Trojan Killer Portable - "Reset" button

“Reset” button


Once the process is completed, you will encounter the following message:

Trojan Killer Portable - Reset complete

Reset complete

Your system should now be fixed and the ‘Stop code: CRITICAL_PROCESS_DIED Tech Support Scam’ issue should be resolved. In case your present anti-malware tool permitted this utility on your device, consider buying the full version of Loaris Trojan Remover to get the defence against these kinds of infections in the future.

If you are still experiencing problems with your PC after meeting these standards, please do not wait to get in touch with us using remarks.

About the author

Valdis Koks

Security engineer, reverse engineering and memory forensics

Leave a Comment